HBC-LAP Series current sensor with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
| 1. Is is positive when Ip flows in the direction of the arrow. |
| 2. Temperature of the primary conductor should not exceed 100 ℃. |
| 3. Dynamic performance are test with a single bar completely filling the primary hole. |
| 4. The primary turns round on the top of the sensor to perform best magnetic clutch. |
ELECTRICAL DATA:
| HBC100LAP | HBC125LAP | HBC200LAP | ||
| Rated Current(IPN) | 100 | 125 | 200 | A |
| Measure Range(IP) | 0～±200 | 0～±200 | 0～±300 | A |
| Rated Output Current(ISN) | 100±0.5% | 125±0.5% | 100±0.5% | mA |
| Supply Voltage(±5%) | ±12～±15 | V | ||
| Supply current loss | 16(@±15V)+IS | mA | ||
| Test resistance | with±12V @±IPNmax | 14(min) 52(max) | 0(min) 26(max) | Ω |
| @±IPmax | 14(min) 17(max) | 0(min) 4(max) | Ω | |
| with±15V @±IPNmax | 40(min) 72(max) | 0(min) 56(max) | Ω | |
| @±IPmax @±300Amax | 40(min) 40(max) | 0(min) 8(max) | Ω | |
| Turns ratio | 1:1000 | 1:1000 | 1:2000 | |
| Sec resistance | 33 | 33 | 76 | Ω |
| Offset current | ≤±0.2 | mA | ||
| Offset current Drift | ≤±0.5 | mA | ||
| Response Time | ＜1 | µs | ||
| Linearity | ≤±0.2 | %FS | ||
| Insulation voltage | 50(60)HZ,1min,3 | KV | ||
| di/dt | ＞100 | A/μs | ||
| Bandwidth(-3dB) | DC…100 | KHz | ||
| Operating Temperature | -40～+85 | ℃ | ||
| Storage Temperature | -40～+105 | ℃ | ||
Features:
Applications:
Notes: Product specifications can be customized
