| Type | Unshielded Power Inductor |
|---|---|
| Inductance | 1uH To 15mH |
| Tolerance | K=±10%,M=±20%,N=±30% |
| Operating Temperature | -40℃ To +105℃ |
| Size | 0709/0809/1112/1315 |
| Core | Iron Or Ferrite |
|---|---|
| Test Frequency | 1KHz |
| Inductance | 4.7uH To 20mH |
| Rated Current | 0.2 To 30A |
| Outer Diameter | 18 - 50mm |
| Current Range | 30A To 80A |
|---|---|
| Inductance Range | 1.2uH To 10uH |
| Installation | DIP |
| Pad Size | 26.2*21.6mm |
| Storage Temperature | -40℃ To +125℃ |
| Type | Through Hole Axial Power Inductor |
|---|---|
| Inductance | 3.9uH To 150mH |
| Tolerance | K=±10%,M=±20% |
| UL Tube | Heat Shrinkable Tube |
| Operating Temperature | -55℃ To +125℃ |
| Type | Lead Power Inductor |
|---|---|
| Inductance | 22uH To 10mH |
| Tolerance | ±10%,±20% |
| Shielding | Ferrite Case |
| Length Of The Lead | Can Be Customized |
| Type | Power Inductor |
|---|---|
| Inductance | 10uH To 47mH |
| Tolerance | K=±10%,M=±20% |
| UL Tube | UL Approved Shrinkable Tube |
| Operating Temperature | -55℃ To +125℃ |
| Name | Common Mode Filter |
|---|---|
| Type | Common Mode Inductor |
| Test Frequency | 100KHz |
| Core Material | Ferrite |
| Application | Noise Suppression |
| Type | Unshielded Power Inductor |
|---|---|
| Inductance | 1uH To 15mH |
| Case Material | Plastic |
| Operating Temperature | -40℃ To +105℃ |
| Size | 0709/0809/1112/1315 |
| Turns | 4Ts |
|---|---|
| Size | 5 X 10mm |
| Impedance | Up To 1KΩ At 45MHz |
| Composite | Ferrite Magnet |
| Application | Industrial Magnet, Industrial Magnet |
| Wire | Enameled Wire |
|---|---|
| Turns Ratio | 1:1 |
| Core | Amorphous / Ferrite Core |
| Test Frequency | 10kHz |
| Type | EMI Filter |